How do I find out who built my home? I made little progress on my own, and I need some help on this. Any tips?

The builder built your home.

If you live in the county depending on how old your house is, could be Yeonas, Pulte, Topher, Ryan or the guy who developed Pimmit Hills. Chances are better than good that William A. Hazel did the site work in most cases. If you live in Oakton chances are pretty good that the builder is independent but you should be able to determine the builder through county permitting records.

What's your address? We'll look it up for you.

If built 50 years ago, white and black folks.

If within the last 30 years, spics.

The people of Falls Church do not want to fuck me. They can suck my cock! Assholes!!!!

thank you. I will look into this.

.AARPer. Wrote:
-------------------------------------------------------
> If you live in the county depending on how old
> your house is, could be Yeonas, Pulte, Topher,
> Ryan or the guy who developed Pimmit Hills.
> Chances are better than good that William A. Hazel
> did the site work in most cases. If you live in
> Oakton chances are pretty good that the builder is
> independent but you should be able to determine
> the builder through county permitting records.


I’m glad I’m not the only Fairfaxian here. Them Hazel boys sure did open things up for over development. Till would’ve sold his own mothers home from beneath her. Good thing she lived in Arlington.
Both of those bastards are still around.
I always hoped to live long enough to see someone sell the cemetery they get buried in.

Are you in a named development, like Vienna Woods? Do all of the houses look fairly similar and all built about the same time? Do you have an HOA?

Open the front door and look at the sticker on the hinge side of the frame, the sticker will tell you who made the home and when.

zoning and records has the PLAT of your home which you can have a copy of, and perhaps even the engineering design - which you are NOT allowed to have a copy of usually

reguardless, if it was built after Bill Clinton - illegal aliens were used for jobs which only certified persons are allowed to do - and built the thing with major flaws

Broyhill built most of the tract houses in McLean

DHXJV Wrote:
-------------------------------------------------------
> Broyhill built most of the tract houses in McLean

Fuck you McLean assholios!!!!

Yes, it is comforting to be shown that you are the same piece of shit you were 20+ years ago. Congratulations and thank you for confirming the already well-established fact that I missed out on absolutely nothing and did not waste my precious time thinking about your ugly face.

I AM THE OP. I found out who my builders were, Miller and Smith. Found them on my community website, and I know nothing about them. not even the HOA does.

Toragrossa built all the tract houses in McLean that weren't Broyhill.

Buy real estate from me. I am an ugly horse face cunt.

There is an amazing thing on the internet....a search engine. You may find out that Miller and Smith are homebuilders and have a web site. https://www.millerandsmith.com/ and have been building since 1964.

Harriet Wrote:
-------------------------------------------------------
> Are you in a named development, like Vienna Woods?
> Do all of the houses look fairly similar and all
> built about the same time? Do you have an HOA?


Yeonas built most of the homes in Vienna Woods. Donated land for for Vienna LL.

I cheated on my husband with Mr. Ed.
Also, I enjoy eating hay.
Call me for a home or a stable.

Falls Church sucks cock Wrote:
-------------------------------------------------------
> The people of Falls Church do not want to fuck me.
> They can suck my cock! Assholes!!!!

An asshole sucking a cock, weird thought!!

Hello, perhaps the real problem lies in the model files themselves. Often poor quality models cause the 3D printer to fail to perform 100% of its functions. For example, I take all models here 3d building model and never experienced any problems. You can try it yourself. I think you are not the only one who will find it useful! Good luck!

Machemaio Wrote:
-------------------------------------------------------
> Hello, perhaps the real problem lies in the model
> files themselves. Often poor quality models cause
> the 3D printer to fail to perform 100% of its
> functions. For example, I take all models here
> 3d building
> model and never experienced any problems.
> You can try it yourself. I think you are not the
> only one who will find it useful! Good luck!


Eat shit and die spammer




Attachments:

A NIGGER BUILT IT

Broyhill built my previous home. It was back in the fifties.