HomeFairfax General ForumArrest/Ticket SearchWiki newPictures/VideosChatArticlesLinksAbout
Off-Topic :  Fairfax Underground fairfax underground logo
Welcome to Fairfax Underground, a project site designed to improve communication among residents of Fairfax County, VA. Feel free to post anything Northern Virginia residents would find interesting.
MORE REASONS TO FIRE DEMOCRAT FROM CONGRESS
Posted by: home depot hell ()
Date: July 05, 2019 11:21AM

So I need a dryer vent clamp. 4" flex just like anyone.

Homedepot and Lowes are run by california which is very PRO-ASIAN and hates america: make deals to keep usa products off the shelf.

THE STORE HAD ONLY 4" HOSE CLAMPS (of any style or country of origin) - and had hoards of 4" clamps in the appliance section and plumbing section (with the ducts) (note USA makes these clamps before china knew what clamps were and still does - yet HD floods the shelf with chinese brands. asshole californians)


FOR CLAMPS: 4" means 4" maximum diameter. it DOES NOT MEAN 4" will fit it means 4" will be an f'ing bitch. if you have 4" clamp, 4" pipe - then you have 'no threads' at the end - even if you fish it on you can't tighten it well because the clamp is at it's very end (weak). with plumbing every type of plumbing has differing measuring and you have to know what that is

the sales person said "you have to undo it" (a liar)




* IT'S ASIAN STRONG ARM SALES TACTIC. IF YOU DON'T HIRE HOMEDEPOT TO INSTALL A NEW ASIAN DRYER - YOU ARE DEALT LIES AND OBSTRUCTION (and hints dropped that you must be dumb - they use that tactic on internet searches)

* you need a 5" clamp to repair because ducts expand and get dented (4.5" clamp is what you need for a 4" vent and at that your struggling with assy of old duct / torn stuff tape etc)



* anyone who uses clamps (screw driver kind) knows that the ends get bent and if your in a tight place trying to thread the end and there's no room it can be impossible to do - a total pain in the ass


So these asshole traitor CEO are living large off America's back, refuse to hire republicans

AND THE FACT IS THEY CAN'T EVEN ORDER A HOSE CLAMP CORRECTLY

THEY FUCKED UP ORDERS NATION WIDE - FLOODED ALL HOMEDEPOT AND LOWES STORES WITH 4" CLAMPS (and you know these stores: if they deem something isn't mainstream they don't carry it: they DO NOT carry 5" or even 4.5" clamps any longer!!)


Options: ReplyQuote
Re: MORE REASONS TO FIRE DEMOCRAT FROM CONGRESS
Posted by: 3ukhx ()
Date: July 05, 2019 11:22AM

You have assholes totally screwing up nation wide (if not world wide) orders.

AND THEY ARE CALLING (me, others) "un-employed" and why they deserve to live large.


That's what democrats are: that's why they need to get the fuck out.


Options: ReplyQuote
Re: MORE REASONS TO FIRE DEMOCRAT FROM CONGRESS
Posted by: Red Neck Engineer ()
Date: July 05, 2019 11:23AM

Have you heard about this new stuff called Duct Tape? It cuts down on the amount of hot air coming out of your pie hole.

Options: ReplyQuote
Re: MORE REASONS TO FIRE DEMOCRAT FROM CONGRESS
Posted by: tmlkj ()
Date: July 05, 2019 11:26AM

well if HD only has 4" clamps you have to buy a new $25 vent that isn't knurled at the ends

YOUR DEAD MOTHER FUCKER - if i catch you

Options: ReplyQuote
Re: MORE REASONS TO FIRE DEMOCRAT FROM CONGRESS
Posted by: wordsmith at work ()
Date: July 05, 2019 12:03PM

home depot hell Wrote:
-------------------------------------------------------
> So I need a dryer vent clamp. 4" flex just like
> anyone.
>
> Homedepot and Lowes are run by california which is
> very PRO-ASIAN and hates america: make deals to
> keep usa products off the shelf.
>
> THE STORE HAD ONLY 4" HOSE CLAMPS (of any style or
> country of origin) - and had hoards of 4" clamps
> in the appliance section and plumbing section
> (with the ducts) (note USA makes these clamps
> before china knew what clamps were and still does
> - yet HD floods the shelf with chinese brands.
> asshole californians)
>
>


> FOR CLAMPS: 4" means 4" maximum diameter. it
> DOES NOT MEAN 4" will fit it means 4" will be an
> f'ing bitch. if you have 4" clamp, 4" pipe - then
> you have 'no threads' at the end - even if you
> fish it on you can't tighten it well because the
> clamp is at it's very end (weak). with plumbing
> every type of plumbing has differing measuring and
> you have to know what that is
>
> the sales person said "you have to undo it" (a
> liar)
>


>
>


> * IT'S ASIAN STRONG ARM SALES TACTIC. IF YOU
> DON'T HIRE HOMEDEPOT TO INSTALL A NEW ASIAN DRYER
> - YOU ARE DEALT LIES AND OBSTRUCTION (and hints
> dropped that you must be dumb - they use that
> tactic on internet searches)
>
> * you need a 5" clamp to repair because
> ducts expand and get dented (4.5" clamp is what
> you need for a 4" vent and at that your struggling
> with assy of old duct / torn stuff tape etc)
>

>


>
> * anyone who uses clamps (screw driver kind)
> knows that the ends get bent and if your in a
> tight place trying to thread the end and there's
> no room it can be impossible to do - a total pain
> in the ass
>
>


> So these asshole traitor CEO are living large off
> America's back, refuse to hire republicans
>
> AND THE FACT IS THEY CAN'T EVEN ORDER A HOSE CLAMP
> CORRECTLY
>
> THEY FUCKED UP ORDERS NATION WIDE - FLOODED ALL
> HOMEDEPOT AND LOWES STORES WITH 4" CLAMPS (and you
> know these stores: if they deem something isn't
> mainstream they don't carry it: they DO NOT carry
> 5" or even 4.5" clamps any longer!!)
>




Ever heard of www.homedepot.com ?

https://www.homedepot.com/p/Everbilt-5-in-Stainless-Steel-Clamp-6772595/202309382

Options: ReplyQuote
Re: MORE REASONS TO FIRE DEMOCRAT FROM CONGRESS
Posted by: mcukd ()
Date: July 11, 2019 01:42PM

there is one way usa (perhaps global) orders get totally screwed up without accountability

PICKED WINNERS, corrupt people without skills in office

Options: ReplyQuote


Your Name: 
Your Email (Optional): 
Subject: 
Attach a file
  • No file can be larger than 75 MB
  • All files together cannot be larger than 300 MB
  • 30 more file(s) can be attached to this message
Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically.
 ********   **     **  ********   ********   *******  
 **     **  **     **  **     **  **        **     ** 
 **     **  **     **  **     **  **        **        
 ********   **     **  ********   ******    ********  
 **     **  **     **  **         **        **     ** 
 **     **  **     **  **         **        **     ** 
 ********    *******   **         ********   *******  
This forum powered by Phorum.