HomeFairfax General ForumArrest/Ticket SearchWiki newPictures/VideosChatArticlesLinksAbout
Fairfax County General :  Fairfax Underground fairfax underground logo
Welcome to Fairfax Underground, a project site designed to improve communication among residents of Fairfax County, VA. Feel free to post anything Northern Virginia residents would find interesting.
RE: more Clinton era scandals: MAG WHEELS Clinton made law "CA emissions chinese parts" - ELEPHANTS of in-efficiency went in
Posted by: Uncle Sam 107a ()
Date: March 18, 2024 06:52PM

MAG WHEELS SUDDENLY BECAME POPULAR ON ASIAN CARS EXACTLY WHEN EMISSIONS LAWS AND FAKE MPG STICKERS WENT ONTO ASIAN CARS AND (usa's chips were hacked to remove more efficient acceleration while china hacked in correct ones to undermine usa sales - in the auto chips)

USA CARS AT FIRST said "steel rim is better" (THAT'S STILL TRUE)

* mag wheels: they weren't and aren't light weight

the "originals" on usa sports cars were light-weight spoke type designs and very expensive

china defiled the design like pissing on a cross of jesus, making them VERY HEAVY - purely to increase sales. this they did while SUING USA TO PUT IN MORE CALIFORNIA EMISSIONS PARTS MANDATED BY WEAPON ENFORCED LAWS

toyota-tacoma-wheels-69343-b.jpgSteel-Wheel-Black-17-x-7-5-Inch-44mm-Off


Mechanics all knew this was a huge lie - but CLINTON catv close ciruit nazzi network kept this off the news and internet



WHY:

1) china mag wheels were MAGNESIUM, exteremly heavy, and a stupid design. they were super heavy - 10x heavier than a steel rim

THIS ADDED LIKE 50LB EVEN 75LB TO A CAR - ANYONE KNOWS that hauling dead weight = gas burned

2) MAG WHEELS FAILED EARLY AND OFTEN - a fact dealers lied about

WHEN YOU HIT POTHOLES THEY GO WAY OUT OF BALANCE, requiring more and more wheel weights (which from china are LEAD and poison the mechanic's machine shop - special vacuums are required to clean up the devil mess of it)

THEY NEED REPLACEMENT FAR MORE OFTEN - they look heavy beefy but they don't last nearly as long as steel wheels

3) steel are much better. light. mostly vacuous/empty. takes a pounding better (except if dented on wrong place, infact)

4) MAG WHEELS ARE 10X MORE EXPENSIVE THAN STEEL WHEELS


mag wheels where hugely advertised by clinton democrats as "a must have feature on your asian car"



so much so - ford and gm began offering them, since, even though they told customers it was all a chinese lie? they couldn't loose sales just on not having them in stock and visible on the lot

Options: ReplyQuote
Re: RE: more Clinton era scandals: MAG WHEELS Clinton made law "CA emissions chinese parts" - ELEPHANTS of in-efficiency went in
Posted by: 34343434 ()
Date: March 18, 2024 06:59PM

THE LYING ASIANS NEVER TOLD PEOPLE THEY WERE LIGHTER

WHAT THEY DID IS STEAL, CULTURALLY APPROPRIATE, THE USA SPORTS CAR MARKET FAD OF MAG WHEELS, STEALING THE NAME

tta-131080_kr_xl.jpg summit racing

THE ABOVE IMAGE IS A LOOK ALIKE OF The real "mag wheel" trend during the late 1990's

* the design was far different AND EXPERIMENTAL (some were known to not be good)

* they were EXPENSIVE AS HELL

* they were made of expensive alloys that REDUCED WEIGHT LOWER THAN STEEL RIMS, not increase

* they looked like a million dollars and you needed to be pretty wealthy to afford them

THE CHINESE PISSED ON ALL THAT, STOLD THE NAME, AND PUT HEAVE CRAP ON MANY CARS DURING CLINTON

WHILE THEY WERE SUING FORD GM, who honestly stuck to steel rims, TO USE MORE LYING ASS EMISSION PARTS (FFU HAS A SEPARATE ARTICLE on clinton scandals pertaining exactly to lying ass emissions parts that didn't save emissions at all)

Options: ReplyQuote
Re: RE: more Clinton era scandals: MAG WHEELS Clinton made law "CA emissions chinese parts" - ELEPHANTS of in-efficiency went in
Posted by: 234222 ()
Date: March 18, 2024 06:59PM

little red riding hood

Options: ReplyQuote
Re: RE: more Clinton era scandals: MAG WHEELS Clinton made law "CA emissions chinese parts" - ELEPHANTS of in-efficiency went in
Posted by: 34r34t ()
Date: March 18, 2024 07:05PM

THE ABOVE IMAGE IS A LOOK ALIKE OF The real "mag wheel" trend during the late 1990's

(by that i mean it does look like SOME of the wacked out designs of the day)

THE TREND WAS THAT LOCAL MACHINE SHOPS AND LARGER USA MACHINE SHOPS WERE USING THEIR CNC MACHINES

(a huge thing in machining - the CNC machines multi-directional metal shaper)

YOU CAN SEE THAT WHEEL ABOVE would be impossible to "simply make" (it is not poured it is put in a computerized router than creates the shape)

THIS WAS THE HOT TREND - to use the latest machine tech to get Wicked wheels on cars. and it was a Pro-USA thing - usa machine shops

CLINTON DE-FUNDED USA MILITARY AND LOCAL MACHINE SHOPS - i had a 2nd friend who lost his job due to it. he was schooled in it, proud of it, and loved his job - and good at it. i saw some of his "self made motorcycle parts" he did for fun. excellent work.

Options: ReplyQuote
Re: RE: more Clinton era scandals: MAG WHEELS Clinton made law "CA emissions chinese parts" - ELEPHANTS of in-efficiency went in
Posted by: 34r34t43 ()
Date: March 18, 2024 07:06PM


chinese mag wheel killed fuel efficiency and ruined tires which is 10x the sin (tires)

the clinton government HELPED THE CHINESE DO IT, while aiming lawsuits and weapons at Ford and GM


Options: ReplyQuote
Re: RE: more Clinton era scandals: MAG WHEELS Clinton made law "CA emissions chinese parts" - ELEPHANTS of in-efficiency went in
Posted by: 1145u5 ()
Date: April 07, 2024 03:09PM

elephant-car.jpg?quality=75&strip=all

i'm getting some good gas mileage with 1/2 ton extra of chinese NICK NACK parts that aren't optional and 75 lbs of "wheels" added, but my tire treads are still too tiny for snow and ice!

Options: ReplyQuote
Re: RE: more Clinton era scandals: MAG WHEELS Clinton made law "CA emissions chinese parts" - ELEPHANTS of in-efficiency went in
Posted by: qwedtgy ()
Date: April 07, 2024 03:13PM

Mr. Eliphant: "you know this is too low even for a chin rest and getting close to my own weight, i want to know what good this thing is"

Options: ReplyQuote
Re: RE: more Clinton era scandals: MAG WHEELS Clinton made law "CA emissions chinese parts" - ELEPHANTS of in-efficiency went in
Posted by: 44u65 ()
Date: April 08, 2024 06:43PM

LET'S CALL THEM QUANTUM DOT WHEEL TECHNOLOGY, AND GIVE THE CHINESE AWARDS FOR THEM

Options: ReplyQuote
Re: RE: more Clinton era scandals: MAG WHEELS Clinton made law "CA emissions chinese parts" - ELEPHANTS of in-efficiency went in
Posted by: 334y ()
Date: April 08, 2024 11:42PM

LET'S CALL THEM QUANTUM DOT WHEEL TECHNOLOGY, AND GIVE THE CHINESE NOBEL PRIZE AWARDS FOR IT, same thing really

Options: ReplyQuote
Re: RE: more Clinton era scandals: MAG WHEELS Clinton made law "CA emissions chinese parts" - ELEPHANTS of in-efficiency went in
Posted by: rg4bn ()
Date: April 09, 2024 11:27PM

.

Options: ReplyQuote
Re: RE: more Clinton era scandals: MAG WHEELS Clinton made law "CA emissions chinese parts" - ELEPHANTS of in-efficiency went in
Posted by: 2r24g3w ()
Date: April 09, 2024 11:31PM

GOOGLE SEARCH

"No but they are pretty. Really though it depends on the brand. Aluminum weighs between 50-65 lbs and steel weighs around 70-75 lbs. so there is some difference but it is pretty insignificant."

that's a lie - i think i want the google CEO dead now


Dorman 939-170 15 x 6 In. Steel Wheel Compatible with Select Ford Models, Black
Visit the Dorman Store
4.5 4.5 out of 5 stars 24 ratings
| Search this page
$63.35
$63.35
FREE Returns
Get $10 off instantly: Pay $53.35 $63.35 upon approval for the Amazon Store Card. No annual fee.
Size 15 x 6 inch
Brand Dorman
Wheel Size 15 Inches
Pitch Circle Diameter 4.25 Inches


Item Weight 12 Pounds


Options: ReplyQuote
Re: RE: more Clinton era scandals: MAG WHEELS Clinton made law "CA emissions chinese parts" - ELEPHANTS of in-efficiency went in
Posted by: erf3wgh4 ()
Date: April 10, 2024 12:04AM

so this industry is full of lies - whenever you go to look

#1 they never say "magnesium", they say "alloy" which is mostly a lie

#2 they avoid showing SHIPPING WEIGHT especially on OEM because that would show you what a crap product they are

Size 16x6.5"
Brand Factory Wheel Replacement
Wheel Size 16 Inches
Pitch Circle Diameter 4.5 Inches


Item Weight 28 Pounds

Toyota Camry: smmal car - 27 Pounds

other models: slighly lower or much higher weight


Item Diameter 16 Inches


Silver with Clearcoat Finish


THEY ARE ALSO MUCH HARDER TO CLEAN (although less often use hub-caps)

THEY ARE ALSO PAINTED, BUT PAINT IS HARDER TO MATCH AND MORE EXPENSIVE

YOU CAN DAMAGE THE PAINT WASHING THEM incorrectly - just like steel rims

this is a problem becasue road dirt "likes to stick to paint" and the cleaners you need, if you can't use black spray paint, are going to damage the silver paint


GM actually came out with a better answer for TRUCKS - a metal cover (not hub-cap!)


Dorman 939-170 15 x 6 In. Steel Wheel Compatible with Select Ford Models
Size 15 x 6 inch
Brand Dorman
Wheel Size 15 Inches
Pitch Circle Diameter 4.25 Inches
Item Weight 12 Pounds


the asian rims are more than 2x the weight of the ford escort*



* the escort would go endlessly it seemed without a gas fill-up. the CLINTON regime put an MPG rating on it worse than asian competing cars using magnesium wheels. ALL LIES.


lot of 4 mag wheels: over 100 lb, over 50 of which was dead weight as i claimed above. more like 75 lb for larger cars (minivan truck and so on)


Options: ReplyQuote
Re: RE: more Clinton era scandals: MAG WHEELS Clinton made law "CA emissions chinese parts" - ELEPHANTS of in-efficiency went in
Posted by: iFORGOT ()
Date: April 10, 2024 04:46PM

iFORGOT

IT'S NOT JUST THE WEIGHT


I HAVE TO DOUBLE EMPHASIZE alloy wheels are poorly shaped and BEND EASIER which MAKES A BIG DIFFERENCE



because they aren't steel and how made, the LIP isn't as good. also they are smooth. THIS MEANS THE TIRE CAN'T SEAT AS WELL ON OLDER RIMS, AND LEAK AIR. leaky tires are in-efficient becaues they cause you to pull over and less MPG and also HIGHER WEAR ON TIRES which is really bad for efficiency

THAT'S NOT ALL (already said) - they bend easier and require MORE WHEEL WEIGHTS, which causes vibration tire damage and also is a problem as to leaking air

A SOFT RIM LIP PAINTED DOESN'T FIT THE TIRE BEAD WELL.

A STEEL RIM WITH TACKY BLACK PAINT CAN GRAB THE BEAD - AS LONG AS IT'S CLEAN (ie wash your car rims when you wash the car you'll be ok)

Options: ReplyQuote
Re: RE: more Clinton era scandals: MAG WHEELS Clinton made law "CA emissions chinese parts" - ELEPHANTS of in-efficiency went in
Posted by: 34t3y ()
Date: April 10, 2024 04:50PM

rb939146_2

steele is easier to shape in sharp curves (good for holding tire beads) and tires "don't make it smooth" - it keeps it's gripping grit. the tire does not smooth the steel. even sandpaper can't smooth steel (unless you work it a very long time)

(whereas aluminum, with rubbing, will become smooth and also worn)

Options: ReplyQuote
Re: RE: more Clinton era scandals: MAG WHEELS Clinton made law "CA emissions chinese parts" - ELEPHANTS of in-efficiency went in
Posted by: TWO MORE ELEPHANTS ()
Date: April 10, 2024 04:56PM

The rim on my tire popped out. What steps should I take to ...
Quora
https://www.quora.com The-rim-on-my-tire-popped-...
Jan 4, 2019 — It depends on why & how it fell off. If it was because of the lug nuts being loose, the holes in the wheel are most likely worn out. A new wheel ...
12 answers
8 votes: It isn’t clear what you mean. The ‘rim’ is the wheel (either the edge that mee

that's also a safety problem - bought a new tire but chinese tire chinese rim ACTUCALL WONT FILL AIR, the "shady tree mechanic" doesnt' know why it's happening

CHECK AMAZON REVIEWS - YOU FIND SOME SWEARING IT'S NOT THEIR LACK OF SPECS - THAT THE TIRE'S BEAD IS TOO BIG AND CHINESE RIPPED THEM OFF


Tires slipping on wheel
SRT Hellcat Forum
https://www.hellcat.org threads tires-slipping-on-wh...
May 4, 2016 — I resolved the slippage issue by mounting the tires dry and putting Permatex High Tack on the bead area of the wheel. Tires are a ***** to mount ...

THIS IS A MORE COMMON PROBLEM ON AMAZON FOR NEW CHINESE TIRES

AGAIN THE BEAD IS WRONG AND PEOPLE SWEAR THEY'VE BOUGHT THE RIGHT TIRE

THE TIRE FILLS WITH AIR, BUT WHEN THEY ACCELERATE THE TIRES SLIP ON THE RIM - causing damage to rim and tire and of course they're totally fucked (ie, returning tires means shipping cost which is an elephant of in-efficiency)

Options: ReplyQuote
Re: RE: more Clinton era scandals: MAG WHEELS Clinton made law "CA emissions chinese parts" - ELEPHANTS of in-efficiency went in
Posted by: 3tg45h ()
Date: April 10, 2024 05:48PM

Hunter Biden didn't lie about this

images?q=tbn:ANd9GcSqXblE8At_FkUOhB1Gnaw

THE LAPTOP FROM HELL is a true story and is UBUNTU and made in china. http://www.fairfaxunderground.com/forum/read/2/4096536.html. (dell's problems stemmed from this evolving - doubled by that dell went about resolving it the wrong way and lost it altogether)

210219a2cd6632c5d5e087894bff04e5.jpgHunter Biden couLD add HELL ON WHEELS to the list though

Options: ReplyQuote
Re: RE: more Clinton era scandals: MAG WHEELS Clinton made law "CA emissions chinese parts" - ELEPHANTS of in-efficiency went in
Posted by: 34t345h4 ()
Date: April 10, 2024 06:11PM

.

Options: ReplyQuote
Re: RE: more Clinton era scandals: MAG WHEELS Clinton made law "CA emissions chinese parts" - ELEPHANTS of in-efficiency went in
Posted by: 3tg34hg54 ()
Date: April 10, 2024 06:54PM

Run-Flat-Tire_Blog_Image_1_1262x845.webp

since these "WEREN'T CHINESE OBAMA REQUIRED ON ALL CARS", i won't make a whole article on

BUT THEY WEIGHT SIGNIFICANTLY MORE, COST MORE PRICE AND MFG TOO, AND THEY DO NOT RUN FLAT. customers are angry when they find out IT'S A LIE.

1) get a nail in the tire you must go to a gas station quickly - the tire deforms and is bad on the rims

2) the gas station informs you THEY CANNOT REPAIR (all) RUN-FLATS, it's not legally allowed because their construction is "different" and brands differ they have no book on it

3) THEY DON'T HAVE THEM IN STOCK, so you can't get on the road unless you REPLACE ALL FOUR TIRES

4) just so happens france/usa/canada/china outsourced to another factory and that particular tire no longer made - you need 4 tires

Options: ReplyQuote
Re: RE: more Clinton era scandals: MAG WHEELS Clinton made law "CA emissions chinese parts" - ELEPHANTS of in-efficiency went in
Posted by: 34t34 ()
Date: April 10, 2024 07:01PM

regular tire: 215/55R16 91H , about 20 lb

runflat tire: 215/55R16 91H , at least 27 lb

(put that on a fat magnesium rim, that's, whith wheel weights :) almost 60 lb a tire or 240 lb. on your car !!!

THAT'S LIKE ADDING 10% WEIGHT TO A 1970'S PASSENGER CAR !! infamous !!

Options: ReplyQuote
Re: RE: more Clinton era scandals: MAG WHEELS Clinton made law "CA emissions chinese parts" - ELEPHANTS of in-efficiency went in
Posted by: hyu5765 ()
Date: April 10, 2024 07:02PM

(today's "energy efficient cars" ad about 1/2 ton to passenger cars due to 1,000 extra chinese parts not needed AND for EV it's a full ton added. the accusatio adding weight is more efficient: is not true)

Options: ReplyQuote
Re: RE: more Clinton era scandals: MAG WHEELS Clinton made law "CA emissions chinese parts" - ELEPHANTS of in-efficiency went in
Posted by: yh4jh65 ()
Date: April 10, 2024 07:04PM

elephant-car.jpg?quality=75&strip=all

i can smell your have plenty of gas, let me see how this goes here

Options: ReplyQuote
Re: RE: more Clinton era scandals: MAG WHEELS Clinton made law "CA emissions chinese parts" - ELEPHANTS of in-efficiency went in
Posted by: 34tg34h ()
Date: April 17, 2024 03:29PM

.

Options: ReplyQuote
Re: RE: more Clinton era scandals: MAG WHEELS Clinton made law "CA emissions chinese parts" - ELEPHANTS of in-efficiency went in
Posted by: g45h4jn ()
Date: April 18, 2024 03:36PM

n

Options: ReplyQuote
Re: RE: more Clinton era scandals: MAG WHEELS Clinton made law "CA emissions chinese parts" - ELEPHANTS of in-efficiency went in
Posted by: tg34h5 ()
Date: April 18, 2024 03:50PM

.

Options: ReplyQuote
Re: RE: more Clinton era scandals: MAG WHEELS Clinton made law "CA emissions chinese parts" - ELEPHANTS of in-efficiency went in
Posted by: 3g35hj ()
Date: April 25, 2024 03:37PM

.

Options: ReplyQuote
Re: RE: more Clinton era scandals: MAG WHEELS Clinton made law "CA emissions chinese parts" - ELEPHANTS of in-efficiency went in
Posted by: 3g35r3 ()
Date: April 27, 2024 04:27PM

.

Options: ReplyQuote
Re: RE: more Clinton era scandals: MAG WHEELS Clinton made law "CA emissions chinese parts" - ELEPHANTS of in-efficiency went in
Posted by: 467kl ()
Date: May 03, 2024 10:55PM

.

Options: ReplyQuote
Re: RE: more Clinton era scandals: MAG WHEELS Clinton made law "CA emissions chinese parts" - ELEPHANTS of in-efficiency went in
Posted by: The_magic_hub ()
Date: May 07, 2024 07:35AM

https://themagicmushroomhub.company.site/
Call/Text; +1 (510)619-0046
https://t.me/Themagicmushroomshub
https://themagicmushroomhub.company.site/

mushroom chocolate bars for sale new york
where to get chocolate mushroom bars
psychedelic bars for sale online
shroom bars for sale colorado
where can i order mushroom chocolate bars texas
where can i buy mushroom bars california
mushroom chocolate bars near me
chocolate bar with mushrooms
mushroom chocolate bars usa
shroom bars for sale
organic mushroom chocolate bar
mushroom chocolate bars reviews
mushroom chocolate bars for sale california
magic mushroom bars for sale usa
order mushroom online
mushroom gummies for sale usa
buy magic mushroom
order mushroom chocolate bars
handmade mushroom chocolate bars
buy magic mushroom chocolate bar usa online
where to buy mushroom chocolate bars reddit

https://themagicmushroomhub.company.site/
https://themagicmushroomhub.company.site/
Attachments:
DIAMOND SHRUUMZ CHOCOLATE 2.jpg

Options: ReplyQuote
Re: RE: more Clinton era scandals: MAG WHEELS Clinton made law "CA emissions chinese parts" - ELEPHANTS of in-efficiency went in
Posted by: 3tg35h4hj ()
Date: May 09, 2024 03:42PM

.

Options: ReplyQuote
Re: RE: more Clinton era scandals: MAG WHEELS Clinton made law "CA emissions chinese parts" - ELEPHANTS of in-efficiency went in
Posted by: efr3wh5 ()
Date: May 15, 2024 09:34AM

.

Options: ReplyQuote


Your Name: 
Your Email (Optional): 
Subject: 
Attach a file
  • No file can be larger than 75 MB
  • All files together cannot be larger than 300 MB
  • 30 more file(s) can be attached to this message
Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically.
  ******    ********   ********   *******   **     ** 
 **    **   **     **  **        **     **  **     ** 
 **         **     **  **               **  **     ** 
 **   ****  ********   ******     *******   ********* 
 **    **   **     **  **               **  **     ** 
 **    **   **     **  **        **     **  **     ** 
  ******    ********   **         *******   **     ** 
This forum powered by Phorum.